8
BA031701-en
Button
Key
Assignment
Esc
Exit page
Pos: 27 /Technische Dokumentation/Alle Geräte/Überschriften/Überschriften 1.1/P/Überschrift 1.1: Prüfablauf @ 8\mod_1200574029101_75.docx @ 140824 @ 2 @ 1
3.3
Test Procedure
Pos: 28 /Technische Dokumentation/Fahrwerksprüftechnik/MSD-SERIES/031701 MSD 3000/BA/Inhalt: 0317 Prüfablauf_12pt @ 29\mod_1343978360334_75.docx @ 1638525 @ @ 1
1 Drive the vehicle onto the test plates
with the front axle.
The wheels must be positioned
straight in the center of the test
plates and must not be blocked by
an engaged gear or brake.
The tester is activated automatically
once the load on both test plates ex-
ceeds 100kg.
The tester conducts a controlled
measurement from 10…5 Hz. Both
sides are measured simultaneously.
At completion of the measurement
the tester switches off automatically.
The damping rate D is determined
and displayed on the screen.
2 Drive the vehicle onto the test plates
with the rear axle.
The test is repeated in the same way
as for the front axle.
Use <F5> to display the amplitudes ei-
ther in separate diagrams or one on top
of the other in the same diagram.
Pos: 29 /-----Format-----/MANUELLER UMBRUCH Seitenumbruch @ 0\mod_1134403577687_0.docx @ 1277 @ @ 1
