MAHA MPJ Series, Оригинальная инструкция по эксплуатации

Страница: 23 / 114

BA550001-en
23
8 Installation
Air pit jacks may only be operated with dry, lubricated compressed air in
accordance with ISO 8573-1:2010 [1:4:2].
To ensure the required compressed air quality, which is necessary for reliable
operation of the pit jack, a maintenance unit must be installed in the supply line
in the immediate vicinity of the pit jack (line length max. 5 m).
See also section "Maintenance unit".
This maintenance unit must consist of a compressed air filter, water separator
and oil nebulizer. These components are necessary to prevent damage to the
pit jack, e.g. due to corrosion.
NOTICE
A refrigeration dryer is not enough for compressed air maintenance! A
refrigeration dryer cannot filter out line dirt and does not supply the appliances
with the oil film that is important for trouble-free operation.
8.1 Safety instructions
WARNING
Installation may only be carried out by authorised and trained specialist staff.
Such specialist staff include authorised, trained specialists employed by the
manufacturer, the authorised dealers and the relevant service partners.
At least one second person must be called in to support the assembly work, and
if necessary other persons must also be called in.
Work on the electrical installation may only be carried out by qualified electri-
cians.
Personal protective equipment must be worn for all work.
Work may only be carried out with suitable tools. Use a wrench with a suitable
width across flats for screws and nuts.
Where reference is made to the use of special tools, these must be used.
For transportation and handling, hoists with suitable lifting gear (hook with
safety latch) and lifting gear (chain slings) must be used.
When threading the chassis into the pit, use slings of different lengths if neces-
sary to prevent the chassis from slipping when tilted.