MAHA MA STAR 5.5, Оригинальная инструкция по эксплуатации

Страница: 33 / 35

BA364601-en
33
7.2 Error Chart
Display Diagnostics Remedy
Signal sound immediately
upon switching on.
Button pressed by mistake. Release button.
Control panel has short
circuit.
Notify service team.
The lift stops when
lowering and the blue
DOWN button light goes
out.
Lift has reached its end
position.
Lift can only move upwards.
If necessary, the lower end
position can be adjusted to
ground conditions by the
service team.
Signal sound when DOWN
button is pressed again: Lift
has met an obstacle.
Free the lift by pressing the
UP button, remove the
obstacle.
Support arms hit the
ground during lowering.
Lower end position has not
been set correctly.
Notify service team.
The lift stops when rising
and the blue UP button
light goes out.
Lift has reached upper end
position (max. lifting
height).
Lift can only be lowered.
Signal sound when UP
button is pressed again:
ceiling impact protection
triggered.
Lower the lift by pressing the
DOWN button.
Signal sound after button is
pressed again only if ceiling
impact protection is present.
Signal sound immediately
after UP button goes off: lift
heavy going (max. load
capacity exceeded).
Lower the lift by pressing the
DOWN button, reduce load.
Signal sound issued
immediately, without
pressing button again.
(If necessary, check for
correct lift mode
configuration!)
Signal sound when
lowering.
Movement within shearing
zone.
No action needed.
Red fault indicator light is
permanently on.
Permissible control
deviation exceeded.
Notify service team.
Signal sound when pressing
the UP or DOWN button:
Support nut breakage.
Red fault indicator light
flashes continuously.
Sensor malfunction.
Notify service team.
UP and DOWN buttons
flashing when pressed:
incorrect lift mode
configuration.