MAHA MA STAR 5.5, Оригинальная инструкция по эксплуатации

Страница: 30 / 35

30
BA364601-en
5 Inspection and Maintenance
5.1 Safety Information
WARNING
• The relevant health and safety regulations must be observed.
•
Wear personal protective equipment.
•
Service work may only be carried out by authorised service technicians.
• Repairs, maintenance and set-up work may only be carried out when the ma-
chinery is stationary. The unit must be disconnected from the power supply
and secured against being switched on again.
•
Work on the electrical part of the lift may only be carried out by qualified staff
or specialist electricians.
ATTENTION: The 230V plug sockets on the operation unit(s) still carry power
even after the system has been switched off!
•
Maintenance and repair work may only be carried out when the lift is load-
free.
•
Only use original replacement parts.
•
Substances that are hazardous to the environment must be disposed of ap-
propriately.
• Do not use high or steam pressure equipment or harsh cleaning agents to
clean the lift.
•
The safety features of the lift must be set by authorised service technicians.
•
The safety features must not be replaced or overridden.
5.2 Inspection and Maintenance Plan
Daily before operating
• Check the support arm extension stops.
•
Check the functioning of the support arm locks.
• Visual check of the circlips on the support arm pins and the threaded inserts
of the support discs
Weekly
•
Check function and wear of load carrying equipment, replace as necessary.
•
Check support arm locks for wear.
Every 6 months
•
Spindles and support nuts: Check fill level of oil pan in the lifting carriage, top
up with SAE140 (Art. No. 1402567) gear oil as necessary.
• Check slider tracks for free movement, lubricate as required.