MAHA MA STAR 5.5, Оригинальная инструкция по эксплуатации

Страница: 31 / 35

BA364601-en
31
•
Check support arm extensions for free movement, lubricate as required.
•
Check support discs for damage, replace as necessary.
•
Check threads of support discs for free movement, lubricate as required.
•
Visual check of all accessible welding seams
Annually
•
The maintenance interval prescribed by the manufacturer is 12 (twelve)
months . This maintenance interval refers to normal workshop usage. If the
equipment is used more frequently or under severe operating conditions (e.g.
outdoors), the interval must be reduced accordingly.
• Maintenance work shall be done only by authorised and trained service tech-
nicians provided by the manufacturer, licensed dealers or service partners.
•
In case of non-compliance the manufacturer's warranty becomes void.
•
Check support nuts for wear and tear.
• Check toothed belts for wear and tear, dirt and correct tension (106…111 Hz),
replace belts if necessary.
•
Check all the lift's screw connections for a tight fit, retighten the screws if
necessary (for tightening torques, see technical handbook).
•
Check all components for damage.
• Brake torque is measured directly on the motor’s drive shaft as part of the
annual operating equipment inspection. The toothed belt must be removed
for this. Brake torque must not fall below 7,2 Nm in both directions of rota-
tion. If the torque falls below this value or there is a fault, the complete motor
unit must be replaced!
• Check optional compressed air components for function and tightness, re-
place if necessary.
•
Check tightening torque of anchor bolts, retighten if necessary (80 Nm).
Every 5 years
•
Replace toothed belt.