![MAHA DUO CM 4.2 A Скачать руководство пользователя страница 20](http://html1.mh-extra.com/html/maha/duo-cm-4-2-a/duo-cm-4-2-a_original-operating-instructions_3666832020.webp)
20
BA082901-en
Pos: 61 / Technische Dokumentation/Hebetechnik/- Archiv -/ 00 H ebetechnik - Alle/Inhalte/I nfo!/Inhalt: Info - Zentrierung des FZGs auf FF_ 12pt @ 26\m od_1325751816178_ 75.docx @ 1146689 @ @ 1
Make sure to center the vehicle on the lift. Eccentric positioning may result in faulty
measurement.
Pos: 62 / Technische Dokumentation/Hebetechnik/- Archiv -/ 00 H ebetechnik - Alle/Inhalte/I nhalt: Zentrier ung des FZGs auf FF (Bild) @ 13\mod_ 1238074176549_ 0.d ocx @ 359471 @ @ 1
Pos: 63 / Technische Dokumentation/Alle Geräte/Überschriften/ Überschriften 1.1/S/Überschrift 1.1: S enk en @ 6\mod_ 1180960432671_75.d ocx @ 95086 @ 2 @ 1
5.6
Lowering
Pos: 64 / Technische Dokumentation/Hebetechnik/DUO/082901 DUO CM/BA/Inhalt: 0829 Senken @ 35\mod_ 1390376446311_75.d ocx @ 1876939 @ @ 1
•
1 To lower the lift press the LIFT DOWN button until the desired height is
reached.
•
Lift briefly raises to disengage the latches from the mechanical locks.
•
Lift stops once button is released or lower limit stop is reached. The lift always
stops shortly before bottom position.
2 To lower the lift completely, release the LIFT DOWN button and push it again.
•
During lowering of lift an audible signal sounds.
3 Release parking brake, remove chocks and drive the vehicle off the lift.
•
When completely lowering the lift, be sure to push the LIFT DOWN button
until
the LED of the LOCK button lights up.
•
The lift can be fully lowered only when the axle lift is in its home position.
Pos: 65 / Technische Dokumentation/Alle Geräte/Überschriften/ Überschriften 1.1/R/ Überschrift 1.1: Radfreiheber (Option) @ 15\m od_1245830680737_ 75.docx @ 394246 @ 2 @ 1
5.7
Wheel-Free Jack (Optional)
Pos: 66 / Technische Dokumentation/Hebetechnik/- Archiv -/ 00 H ebetechnik - Alle/Inhalte/I nhalt: Radfreiheber Heben/Senken HBZ_ 12pt @ 26\m od_1325751975859_ 75.docx @ 1146753 @ @ 1
Raising
•
Vehicle must be centered over the wheel-free jack.
1 Lift the extensions using the handles and position them under the vehicle lift
points.
2 If required, use additional spacer blocks under the vehicle.
3 Raise the vehicle briefly using button <WFJ UP> and check for secure contact
of the extensions at the vehicle manufacturers' recommended lift points. Then
raise the vehicle to the desired height.
•
Raising motion is stopped when button is released or upper limit stop is
reached.