MAGUIRE PRS-20, Установка, эксплуатация и обслуживание

Страница: 29 / 47

Maguire Products, Inc.
Edition: June 20, 2012 – PRS-20
29
Maguire Purging Recovery System
13. Release the 2 Discharge Chute latches on each side of chute & remove.
14. Vacuum the Transition Discharge.
15. Vacuum Chute area.
16. Using Air Blow Gun Thoroughly Blow Off All Areas / Components, working from
the top of the machine downward to the floor.
17. Reinstall Screen Ring (using same reverse grip)
18. Reinstall the Transition Discharge. Slide the transition discharge in towards the back
of the granulator cabinet until it stops. Swing discharge arm stop against chute. Hold
pressure against arm stop and press latch downward to lock arm in place.
19. Reinstall Discharge Chute & Secure Both Latches.
20. Close the Containment Chamber Cover and secure both grip latches.
21. Close Access Door On The Front Of Machine & Secure Knobs.
22. Restore the Electrical Power Source.
23. Plug in the Granulator.
24. Restart your Granulator. See Starting / Stopping the PRS-20 on page 19.