Maguire Products WEIGH SCALE BLENDER WSBMB Series, Установка, эксплуатация и обслуживание

Страница: 9 / 148

M A G U I R E P R O D U C T S , I N C .
9
W E I G H S C A L E B L E N D E R

Safety Hazards
See Blender Parts Key for Safety Hazard Locations
HAZARD - ROTATING MIX BLADE
Mix Blades are driven with substantial torque. Never place
your hand in the Mix Chamber while the blades are rotating.
SERIOUS INJURY WILL RESULT. Always disconnect blender
power using proper lockout/tagout procedures before
servicing. Never defeat the Mix Chamber safety interlock
switch.
HAZARD - SHARP MIX BLADES
Over time, Mix Blades may become RAZOR SHARP.
ALWAYS be careful when TOUCHING or CLEANING these
blades. Check for Sharp Edges frequently.
Replace Blades if a Hazard exists.
HAZARD - SLIDE VALVES
Slide valves in hoppers SLAM CLOSED without warning.
ALWAYS keep fingers clear of slide gate openings.
NEVER use your fingers to clear an obstruction.
NEVER use your fingers to move a sticking slide gate.
HAZARD - ELECTRICAL
Only qualified electrical technicians should make electrical
connections. Disconnect and lockout power supply before
servicing WXB Blender.
HAZARD - ROTATING SHAFT
Auger Feeders contain a rotating shaft.
ALWAYS keep fingers clear of rotating shaft and auger.
NEVER use your fingers to clear an obstruction.
NEVER touch a rotating shaft or auger.
HAZARD - FALLING OBJECTS
Do Not open hopper access door if material level is above
hopper cleanout door.