Maguire Products MLS Clear Vu, Установка, эксплуатация и обслуживание

Страница: 32 / 38

Maguire Products, Inc.
32
MLS Clear Vu

TRAY ASSEMBLY
18. Unfasten and remove existing controller tray from top of the loader.
19. Install new controller tray assembly as shown.
Use these two holes
to install SLAVE
controller tray
1/4-20 x 3/4
Button Head (2)
1/4-20 Nylok
Nut (2)
1/4 Starwasher (6)
NEW TRAY
NEW TRAY
SLAVE
Controller
Mount
OLD TRAY
¼-20 x 3/4
Button Head (2)
¼-20 x 1"
Button Head (2)
¼-20 Nylok
Nut (2)
¼-20 Nylok
Nut (2)
20. Install MAIN controller on bottom tray.
A. Plug power cord into motor starter box.
B.
Reconnect “VACUUM MOTOR” cord to connector in endplate.
C. Plug in the YELLOW end of the DB9 cable supplied in the kit into the DB9 connector on
the endplate.
D. Reconnect the correct receiver cables to the back of the controller.
21. Install FOLLOWER controller on top try.
A. Plug Power cord into Motor Starter Box.
B. Connect the gray end of DB9 cable to connector in endplate.
C. Connect the new receiver cables to the back of the controller.
IMPORTANT: THE YELLOW END OF THE DB9 CABLE SHOULD ALWAYS BE
PLUGED INTO THE “MA IN ” CONTROLLER.