8
Magtrol AN 2000 C
Instruction Manual
CONFIGURATION
Power supply (page 9 and 10)
Instruments supplied for 115/ 230 V AC power are factory
set for 230 V AC (USA market 115 V AC).
Instruments supplied for 24/ 48 V AC power are factory
set for 24 V AC.
Instruments supplied for 10-30 V DC can be powered
from any voltage between 10 and 30 V DC without need
of making changes.
9
Check the wiring label before power connection.
PACKAGE CONTENTS
Instructions manual in English.
D.P.M. model AN 2000 C.
Accessories for panel mounting (sealing gasket and
fastening clips).
Accessories for wiring connections (removable plug-in
connectors and fingertip).
Wiring label stuck to the AN 2000 C case.
Two sets of engineering units labels.
9
Check the package contents.
2. GETTING STARTED
Programming instructions (page 11 and 12)
The software is divided into several independently
accessible modules to configure the input, the display, the
setpoints, the analogical output, the output
communication and logic inputs.
9
Read carefully this section.
Input type (page 13 and 14)
The instrument provides two excitation voltages to supply
the transducer (5 V or 10 V). The instrument is set up at
fabrication for 10 V.
The maximum voltage applicable to the instrument is 300
mV. There are four available input ranges: 15 mV, 30 mV,
60 mV and 300 mV.
9
Check the cell sensitivity. If you have any doubt please
consult the cell specifications
.
Programming Lock-out (page 33)
The instrument is set at the factory with the program
routines totally accessible.
Warning! Keep your unlock code in a secure place
. If
you lost it, it is possible to reset it (page 36).
