7
Magtrol Model 6400 Torque Transducer Display
Chapter 2 – Controls
GENERAL
INFORMA
TION
2.3
VACUUM FLUORESCENT DISPLAY (VFD)
The VFD provides information about the control functions, the torque transducer, and an auxiliary
input device (if connected). The displays, from left to right, are:
•
POWER (expressed in horsepower, kilowatts or watts) or
AUX INPUT (expressed in scale factor times the auxiliary input voltage).
•
TORQUE
•
SPEED
•
Memory Indicator
•
Overload Indicator (If the inputs exceed the range of the instrument, "-OL-" will appear in
the TORQUE or SPEED portion of the display. Once the condition has cleared, the unit
will automatically return to the main menu.)
2.3.1
C
ONTRAST
S
ETTINGS
The 6400 is shipped with the Contrast programmed to the lowest setting in order to prolong display
life. If it is necessary to increase the Contrast for improved readability, execute the following steps:
1. Press and release SHIFT.
2. Press and release SETUP.
3. Press and release UP
S
button twice. "Menu: I/O" appears in the display.
4. Press and release SHIFT. The display appears as follows:
POWER/AUX
TORQUE
SPEED
Figure 2–2 Contrast Setup Menu
5. Use UP
S
and DOWN
T
buttons until desired brightness is reached (select from a range of
0 to 3).
6. Press SHIFT three times to return to main menu.
Note:
The lowest possible setting should be used to achieve desired result.
Using a setting higher than necessary may cause display segments
to burn-in over a period of time, resulting in uneven illumination
from segment to segment.
Содержание 6400
Страница 48: ...39 APPENDICES Appendix C Schematics C 1 ANALOG SECTION...
Страница 49: ...40 Magtrol Model 6400 Torque Transducer Display Appendix C Schematics APPENDICES C 2 CPU SECTION...
Страница 50: ...41 Magtrol Model 6400 Torque Transducer Display Appendix C Schematics APPENDICES C 3 INPUT OUTPUT I O SECTION...
Страница 51: ...42 Magtrol Model 6400 Torque Transducer Display Appendix C Schematics APPENDICES C 4 POWER SUPPLY SECTION...