Magtrol 6400, Руководство пользователя, Страница: 12 / 56

3
Magtrol Model 6400 Torque Transducer Display Chapter 1 – Introduction
GENERAL
INFORMA
TION
1.3 DATA SHEET
Model 6400 T orque
T ransd u ce r Displ a y
MODEL 6400
TORQUE TRANSDUCER DISPLAY
Power Supply (AC)
Model
6400
6400A
±10 VDC
Auxiliary Input
Device
Data Acquisition
System
Input Power
120V/60Hz
240V/50 Hz
TM, TMHS or TMB Series
Torque Transducer
GPIB
RS-232
PC
TM Software
or
RS-232C
GPIB/IEEE–488
CAUTION: DOUBLE POLE FUSING
16VA 50/60Hz
EARTH
GROUND
FUSE (5×20mm):
120V UL/CSA 200mA 250V SB
240V IEC 80mA 250V T
MAGTROL, INC. BUFFALO, NY
TORQUE METER
AUX.
INPUT
TORQUE SPEED
SYSTEM CONFIGURATION
FEATURES
• For use with all Magtrol TM, TMHS and TMB Torque
Transducers
• Pass/Fail Testing for torque, speed and auxiliary input
• BITE: Built-In Test Equipment
• RS-232 & IEEE-488 Interfaces
• High Speed Data Acquisition: 100 torque and speed
readings per second via IEEE bus
• High Quality, Easy-to-Read Vacuum Fluorescent
Readout: Displays torque, speed, power and direction
of rotation
• Torque Measurement Options: Standard English,
metric and SI settings
• Overload Indication
• Tare Function
• Internal Data Storage: Up to 100 data points
• Auxiliary ± 10 VDC Analog Input for additional
transducer
• Access to TM signals via back panel BNC connectors
• Interfaces with Magtrol TM Software
• Closed Box Calibration
• 19" (482.6 mm) Rack Mounts with Handles
DESCRIPTION
Magtrol’s Model 6400 Torque Transducer Display is designed
specifically for use with all TM, TMHS and TMB Torque
Transducers. This easy-to-use device powers the transducer
and utilizes high speed Digital Signal Processing (DSP) to
display torque, speed, mechanical power and direction of
rotation.
The 6400 can be used as a basic display, as an interface with
Magtrol TM Software or on the production line using its
pass/fail feature. The unit includes an auxiliary analog input
for the option of testing with an additional transducer and a
special tare function to help offset any slight residuals caused
by couplings or suspended loads. The 6400 also has IEEE-488
and RS-232 interface capabilities, allowing a PC-controlled
environment that can yield high data acquisition rates of up
to 100 torque and speed readings per second. With Magtrol's
TM Software (sold separately), the data for torque, speed
and mechanical power can be automatically collected, saved,
displayed graphically, printed or exported.
PASS/FAIL MOTOR TESTING
The Model 6400 comes with an easy-to-use motor testing
Pass/Fail feature. This feature is ideal for quick pass/fail
(go/no go) testing in production and incoming inspection
applications.
When the 6400 is operated in the Pass/Fail mode, one of
three readings is used as the tested parameter: torque, speed
or auxiliary transducer. The two parameters not used are set
with user defined upper and lower acceptable limits. As the
motor is loaded to the tested parameter value (for example,
speed), the other two parameters (in this case, torque and
transducer) will indicate PASS or FAIL. The display will show
pass or fail, or can be toggled to display the actual values.