Magtrol 3411, Руководство пользователя, Страница: 36 / 59

27
Magtrol Model 3411 Torque Display
Chapter 5 – Computer Controlled Operation
OPERA
TION
5.3.2 a
dministRation
s
ettings
If desired, you may add security to protect access to the remote control panel. Just select a username
and password and hit the “Turn Security On” button. This will prevent users from changing any of
the unit’s settings, as well as prevent the viewing of all of the other pages. Users will still be able to
view the current power, torque and speed readings without a valid username password combination.
To turn security off, you must know the current username and password. If the username or password
is forgotten, it can be reset to the default (admin/admin) by sending the “AUTH” command over
USB (section 6.3).
Figure 5–2 3411 Administration Settings
5.3.3 n
etwoRk
s
ettings
You can change from DHCP to a statically set IP address using the network settings page. When
the page is loaded, the current values are loaded in the appropriate locations. When using DHCP,
the IP address, net mask, and gateway text inputs boxes are disabled. To enable them, uncheck the
DHCP checkbox and fill in the desired values. Click the update button to have the settings take
effect. Once the new settings are valid, the web interface will provide a button which will reload
the page at its new address.
Figure 5–3 Network Settings