Compliance
FCC INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
•
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
CANADIAN DOC STATEMENT
This digital apparatus does not exceed the Class B limits for radio noise from digital apparatus set out
in the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de la classe B prescrites dans le Règlement sur le brouillage
radioélectrique édicté par le ministère des Communications du Canada.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conformé à la norme NMB-003 du Canada.
CE STANDARDS
Testing for compliance with CE requirements was performed by an independent laboratory. The unit
under test was found compliant with standards established for Class B devices.
UL/CSA
This product is recognized per UL 60950-1, 2nd Edition, 2011-12-19 (Information Technology
Equipment - Safety - Part 1: General Requirements), CSA C22.2 No. 60950-1-07, 2nd Edition,
2011-12 (Information Technology Equipment - Safety - Part 1: General Requirements).
ROHS STATEMENT
When ordered as RoHS compliant, this product meets the Electrical and Electronic Equipment (EEE)
Reduction of Hazardous Substances (RoHS) European Directive 2002/95/EC. The marking is clearly
recognizable, either as written words like “Pb-free,” “lead-free,” or as another clear symbol ( )
Commands
Some applications include a visual indication of whether the device
is active or not. Contact your representative to learn where you can
download your application.
MICR Read
Orient the check so the MICR line is down and the printed side
faces the center of MICRSafe as shown in major components
diagram. When MICRSafe detects a check is present, its motor
turns on. Gently urge the check forward until the device engages
with the check, then let go. MICRSafe transports the check around
the check path and eject it through the other side.
Card Read
An operator can swipe a magnetic stripe card through the MSR in
either direction, but the magnetic stripe must be oriented in only
one direction as shown in major components diagram. The MSR is
capable of reading ISO, AAMVA, and CDL encoded cards.
Visual and Auditory Cues
LED indicator conditions for check and card reading operations
listed below. The LED indicator for check reading is located to the
left of the slot where the check is first inserted for reading.
The LED indicator for card reading is located on the upper left side
of the MSR rail.
Color
Meaning
off
Power off
Solid Green
Ready to read check or card
OFF to SOLID RED
Good read
FLASH RED/GREEN
Data sensor blocked (motor does not run)
FLASH RED
Motor sensor blocked (motor does not run)
CAUTION:
If another keyboard is connected to the same host as
this device and a key is pressed on the other keyboard while this
device is transmitting, then the data transmitted by this device may
get corrupted.
CAUTION:
To avoid damaging the read head, only clean the card
path with approved cleaning cards. DO NOT use liquid cleaning
products or insert any other objects into the device.
CAUTION:
Do not place MICRSafe within 6 inches of a
computer monitor or power supply. These devices may cause
undesirable interference with check reading operation.
Technical Support
When contacting the support team please have power to your
reader and have the part number and serial number(s) available,
contact [email protected]
Registered to ISO 9001:2015 © Copyright 2020 MagTek, Inc. PN D99875516 rev. 20 4/20
MagTek
®
Inc., 1710 Apollo Court, Seal Beach CA 90740 | p 562-546-6400 | support 651-415-6800 | f 562-546-6301 | www.magtek.com
Pb
Use and Compliance
