manualshive.com logo in svg

Magtek MICR Plus, Техническое справочное руководство

Поделиться
Скачать
Magtek MICR Plus Скачать руководство пользователя страница 55

 

Appendix C.  Troubleshooting Guide 

 

 

47

 
 
   

04 Analyze 

data

 

 
Analyze the data received by the PC: 

◊

 

If the data is good, continue to step 16. 

◊

 

If the data contains one or more '?', continue to step 06. 

◊

 

If the data is missing characters, continue to step 07. 

◊

 

If the data is garbled, continue to step 08. 

◊

 

If the data is good but not what is expected, continue to step 09. 

 
 
 
   

05 Verify 

parameters

 

 
Use SET-MICR to verify the following parameters: 

•

 

"Send Data After Error" - if this option is set to NO, the MICR Plus will not send any data 
after a read error. Use SET-MICR to change this option to YES. 

•

 

"Use CTS/DSR"  - if this option is set to USE, the MICR Plus will not send any data unless 
the CTS and DSR signals are enabled. Use SET-MICR to change this option to IGNORE. 

 
Determine if any of the conditions described above are true: 

◊

 

If yes, rectify and continue to step 02. 

◊

 

If no,  continue to step 14. 

 
 
 
   

06 Read 

error

 

 
Possible causes for this problem are: 

•

 

Printing problem - the check being read may not  meet the requirements of the ANSI 
Standards. Use one the sample checks provided by MagTek . 

•

 

Feeding the check - do not hold on to the check as it goes around the path. Release the check 
immediately after the MICR Plus "grabs" it. Also, make sure that the front end is not tilted up 
while the check is being read. 

•

 

Foreign debris – power off the MICR Plus and try to push out any loose debris on the check 
path. Grab the cleaning card and force it through the check path (this is a manual process, the 
motor will not turn on). Try this procedure several times until the debris comes out.  Power 
on the MICR Plus again. 

Содержание MICR Plus







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды