manualshive.com logo in svg

Magtek MICR Plus, Техническое справочное руководство

Поделиться
Скачать
Magtek MICR Plus Скачать руководство пользователя страница 18

MICR PLUS, RS-232 

 

 

10 

 

•

 

[COMMAND]

 

is 2 or 3 alpha characters.   

•

 

[Data]

 is optional as described below for each command.   

•

 

<CR>

 is always required. 

•

 

All characters are ASCII 

•

 

No spaces, brackets, or angle brackets required. 

 

SWA - SWITCH A COMMAND 

 

The SWA command, shown in Table 4-1, controls the communication parameters for the RS-232 
Host port.  The data for this command consists of 8 ASCII bits (“0” = hex 30 and “1” = hex 31).   
 

Note 

 

The RS-232 auxiliary port will be set with the same communication 
parameters as the RS-232 Host Port. 

 
To execute, send the SWA command as follows: 
 

SWA 01010101<CR> 

  

(with data) 

or  

SWA <CR>   

 

(without data) 

 

When sending data, all 8 bits must be provided.  The MICR Plus will execute the command but 
it will not reply.  To make this command permanent, use the SA command described below.   
 
If no data is sent, the MICR Plus responds with the current settings for SWA.  

 

Note 

 

The new settings for the serial port will not become 
effective until the RS command is executed.  

 

Содержание MICR Plus







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды