manualshive.com logo in svg

Magtek MICR Plus, Техническое справочное руководство

Поделиться
Скачать
Magtek MICR Plus Скачать руководство пользователя страница 26

MICR PLUS, RS-232 

 

 

18 

 

Data Header 

 
If YES is selected, a single character header precedes the data.  For MICR data, the message is 
transmitted as follows: 
 
MICR data: 

‘C’[data] 

 
For card data, the header position on the message is controlled by the Card Data Message 
parameter (see below).  Therefore, the message may be transmitted as follows: 
 
If Multiple Message:  ‘M’[TK1]‘M’[TK2]’M’[TK3] 
 
If Single Message: 

‘M’[TK1] [TK2] [TK3] 

 
It is important to note that the Data Header precedes the data and not the message.  For example, 
if  <STX>, <ETX> and Data Header are set to YES, a MICR data message will be transmitted as 
follows: 
 
MICR data: 

<STX>‘C’[data]<ETX> 

 

Card Data Message 

 
This option determines the structure of the output message for the individual tracks when a credit 
card is read.  If Multiple is selected, the Control Characters (see SWB, below) and Data Header 
(see Data Header, above) are added to each track individually.  On the other hand, if Single is 
selected, all available tracks are lumped together into a single message. For example, if  <STX>, 
<ETX> and Data Header are set to YES, the output message may be transmitted as follows: 
 
If Multiple Message: 

 <STX>‘M’[TK1]<ETX><STX>‘M’[TK2]<ETX><STX>‘M’[TK3]<ETX> 

 
If Single Message: 

 <STX>‘M’[TK1] [TK2] [TK3]<ETX>

 

 

HW - HARDWARE COMMAND 

 

This command controls miscellaneous hardware options, shown in Table 4-6.  The data for this 
command consists of 8 ASCII bits (“0” = hex 30 and “1” = hex 31).   
 
To execute, send the HW command as follows: 

Содержание MICR Plus







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды