Rev. 1.01
9
P/N: 99875478
Cleaning the I380 Encoder
To clean the I380 rollers, navigate to the Settings screen by selecting [Menu] and then [Settings]. Enter
the two required passwords (call the MagTek Help desk for the passwords) and then press the [Tuning]
and then [Advanced] button on the Tuning screen.
The window below will be shown. Press the [Clean] button in the lower left hand corner of the screen
and insert an encoder cleaning card (P/N: 96700004) into the card exception slot (located on the card
access door) to clean the encoder (
Note: The card should be opened and ready for use before the Clean
button is pressed
) . The cleaning process will be complete when the cleaning card is deposited into the
Card Eject Bin.
Note: The cleaning card should be damp but not overly wet. If the card is very wet, either wait a few
minutes until the card has dried sufficiently or speed the process by gently fanning the card to
evaporate the excess moisture.
Содержание EXPRESSCARD 1000
Страница 2: ...Rev 1 01 2 P N 99875478 Figure 3 Figure 4...
Страница 5: ...Rev 1 01 5 P N 99875478 Figure 6 Figure 7...
