Rev. 1.01
12
P/N: 99875478
Printing a Test Card
It is recommended that after servicing each area of the ExpressCard 1000 that a few test cards be printed
to verify that the machine is functioning properly.
To print a test card, press the [Menu] button on the Status screen, then touch the [Settings] button on the
Main Menu screen, and finally select the [Samples] button on the Settings Menu screen.
Four sample options will be presented as shown below (sample images may vary); select the sample
type you wish to create. The ExpressCard will produce the desired sample card and dispense the card via
the Card Eject Bin located at the front of the machine. However, if any errors occur during card
processing, the card will be redirected to the internal Card Rejection Bin. The Card Rejection Bin is
located next to the Card Hoppers and Printer, refer to Component Identification section at the beginning
of this document
Содержание EXPRESSCARD 1000
Страница 2: ...Rev 1 01 2 P N 99875478 Figure 3 Figure 4...
Страница 5: ...Rev 1 01 5 P N 99875478 Figure 6 Figure 7...
