3 - Mechanical Integration
DynaWave| OEM Contactless NFC Module | Installation and Operation Manual
Page 27 of 39 (
D998200265-10
)
3.5
Mounting
The device is designed to be mounted into an enclosure using threaded studs, nuts, and washers (see
). It can also be mounted using screws, nuts, and washers, and some solutions may not include
an enclosure. Studs or screws should be size
#4
or
M3
. The washers help spread the load more evenly,
and can either be 4 ea. round washers, 2 ea. long flat washers, or one fixing plate. MagTek recommends
2 ea. long washers. See
for recommended washer / fixing plate dimensions.
If the solution will be exposed to the elements, it must include an enclosure, and the mounting hardware
and torque specifications must apply adequate force to create a water-tight seal between the enclosure and
the gasket. For example, for M3 threaded rods and nuts, the torque may be in the range of 5 to 6 in-lbs.
(0.5 to 0.7 N-m).
