Magstim 2nd Generation Coils
Operating Manual
© The Magstim Company Limited
29
MOP04-EN-03
C2. The Magstim 200
2
Guidance and Manufacturer’s Declaration –
Electromagnetic Emissions
The Magstim 200
2
is intended for use in the electromagnetic environment specified below. The customer
or the user of the equipment should assure that it is used in such an environment.
Emissions Test
Compliance
Electromagnetic environment - guidance
RF emissions
EN55011
Group 1
The Magstim 200
2
must emit electromagnetic energy in order
to perform its intended function. Nearby electronic equipment
may be affected.
RF emissions
EN55011
Class B
The Magstim 200
2
is suitable for use in all establishments other
than domestic and those directly connected to the public low-
voltage power supply network that supplies buildings used for
domestic purposes.
Harmonic
Emissions
IEC 61000-3-2
Class B
(by equipment
type)
Voltage
fluctuations/ flicker
emissions
IEC 61000-3-3
Complies
Guidance and Manufacturer’s Declaration –
Electromagnetic Immunity
The Magstim 200
2
is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the Magstim 200
2
can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the Magstim 200
2
as recommended below, according to the
maximum output power of the communications.
Rated maximum
output
power of
transmitter
W
Separation distance according to frequency of transmitter
m
150 kHz to 80
MHz
3,5
d
= [ ]
P
V
1
Where
V
1
= 3
80 MHz to 800 MHz
3,5
d
= [ ]
P
E
1
Where
E
1
= 3
80
MHz
to
800
MHz
7
d
= [ ]
P
E
1
Where
E
1
= 3
0,01
0,117
0,117
0,233
0,1
0,369
0,369
0,738
1
1,167
1,167
2,333
10
3,689
3,689
7,379