Magnus MIPS, Инструкция по эксплуатации

Страница: 6 / 27

6
MIPS
Note:
• The Specifications are subject to change without any obligation on the part of the Manufacturer.
• The Microscopes or Accessories shown in the Catalogs or Manual are not the part of standard Equipments.
•
Recommended PC Specifications :
Intel Pentium P IV 2.0 GHz or better with at least 256 MB RAM, 20 GB
Hard Disk, USB 2.0 ports Windows XP Operating System
• Storage Humidity :
Up to 98%RH
• Storage temp. :
-25° C to + 70° C
• Ambient operating Humidity :
20 up to 93%RH
• Ambient operating temp. :
-15° C to + 55° C
• Power consumption :
< 1.3 W
• Power supply :
5VDC via USB bus
• Control Communication :
Camera control via USB bus
• Shutter Speeds :
Automatic from 1/50 to 1/100,000
• White Balance Mode :
AWB auto white mode, Fixed modes selectable via software
• Iris Control :
CCD Iris default
• Contour enhancement :
Default on
• Back light compensation :
Default on (selectable via software)
• Synchronization :
Internal
• Mirror Mode :
Selectable via software
• Scan Mode :
Interlaced / Non Interlaced (selectable via Software)
• Gain Control :
Automatic 36 dB (AGC default) or Fixed options via software
• Gamma :
0.45 default (1.0 via Software)
• Signal to noise ratio :
> 48 dB (AGC off)
• Sensitivity :
< 1.0 Lux
• (USB 2.0, 30fps) :
720 x 576 pixels max (PAL)
• Active pixels (HxV) :
752 x 582 (PAL)
• CCD Sensor :
1/4” Interline Transfer CCD
• Video System :
PAL / NTSC (Selectable from Software)
Technical Specifications