Magnus MIPS, Инструкция по эксплуатации

Страница: 19 / 27

19
Clicking on the control option on the menu bar will display the control panel. The control panel can be
used to make changes to the camera settings. The various control features are available as under :
Shutter Speed
The shutter speed of the camera is perfectly analogous to the shutter speed of a conventional camera,
although for a solid state imager, such as that used in the MIPS USB cameras, there is no physical
shutter as such. For this type of camera, the shutter speed refers to an electronic shutter, which
determines the length of time over which charge is accumulated on the image sensor.
In low light conditions, a slow shutter speed (long integration time) is required in order to get a good
quality image.
However, if there is significant motion in the scene, a slow shutter speed will result in significant
blurring of the image, and a faster shutter speed will be needed to get a clear sharp image.
The shutter speed of the MIPS USB cameras can be varied from 1/50 second to 1/10000 second.
There is also an automatic setting (Electric Iris), in which the shutter speed is adjusted automatically
according to the overall light level.
There is also "flicker less" shutter speed, which is used to prevent fluctuations in image brightness
when operating under fluorescent lighting.
MIPS
Using The Control Panel