Auto creaser
22
MC-35A
6.3 Sniper Patent Technology
Using the sniper mode there
is no need to input crease data one by one to
create a job. Print a mark on the position where you want to crease. Machine
will crease on the mark on the fly.
6.3.1 ow to activate Sniper?
Press Mode Key
once entering Input Crease Data Screen.
Input 0 and press Enter, Use REG Mark Screen will come out.
1. Input 1, “*” appears beside “Yes”, Press Enter, screen jumps to Ready Screen,
Sniper is activated.
2. Input 1, “*” appears beside “No”, Press Enter, screen jumps to Ready
Screen, Sniper is not activated.
