Magnum Industrial MI-52100, Руководство по эксплуатации

Страница: 6 / 13

5
ASSEMBLY INSTRUCTIONS
MAGNUM INDUSTRIAL MI-52100 10" OVERARM BLADE GUARD
FIGURE 5: REQUIRED TABLE DIMENSIONS
5
Minimum distance: 39-1/4"
Maximum distance: 69-5/8"
Minimum: 3"
FIGURES 6 and 7: INSTALLING THE HOOD ASSEMBLY
FIGURE 8: CONNECTING THE DUST HOSE
6
Leave 1" for dust hose
7
8
BASIC FUNCTIONS
The MI-52100 is a blade cover and dust collection hood.
It's intended for use on 10" table saws and is compatible
with saws equipped with riving knives.
Connecting to any 4" dust collection hose, this blade
guard removes dust directly above the blade. The boom
mounts to the end of your table saw extension table
and allows the blade cover to swing out of the way or be
removed when needed.
To install the boom without modification, you need at
least 39-3/4" between the edge of your extension table
and the table saw blade. The maximum distance between
the blade and table edge is 69-5/8". For a secure fit, your
extension table must a have apron of at least 3". See
Figure 5.
INSTALLING THE HOOD ASSEMBLY TO
THE INNER BOOM
Slide the HOOD ASSEMBLY (A) over the end of the
INNER BOOM (B) . Leave approximately 1" of the INNER
BOOM protruding past the mount. See Figure 6.
Insert one 1/4" x 1-1/4" BUTTON HEAD BOLT (C) through
the two holes on the underside of the hood assembly.
See Figure 7. Thread on a 1/4"
LOCK NUT (D) and tighten.
INSTALLING THE DUST HOSE
Connect the dust collection hose to the hood and the
inner boom using the two supplied
HOSE CLAMPS (E) .
See Figure 8.