Assembling Idler Roller Cover
Lock the idler roller cover at
the edge of platen by screwing
2 pieces of M6 x 10L hex. head
screw and 1 piece of M6 x 10L
polygon knob.
Assembling Back Stop
Place the platen table on the top
of the platen by screwing tightly
with 2 pieces of M6 x 16L hex.
head screw.
Install Sanding Paper
Push the handle bar into the loose
position. Then place the sanding
paper into the platen and push
the handle bar back into the tight
position.
Assembling the Table
Place the table at the vertical
position of platen by screwing
the 1 piece of M8 x 35L handle
and one piece of M8 x 18 washers.