Magnum Industrial MI-15300, Руководство по эксплуатации

Страница: 5 / 11

receive two 1/4"- 20 screws. Fasten bracket assembly to wheel guard with two screws provided with
eyeshields.
Installation
MOUNT GRINDER
1. Mount grinder to a solid horizontal surface (hardware not provided). If mounted to metal pedestal,
align mounting holes with corresponding holes in pedestal. Insert a 1/4-20 x 1%" hex head bolt
with flat washer through base of grinder. From bot- tom of pedestal, place a 1/4" flat washer and
1/4"-20 hex nut onto the bolt. Tlghten only untl space between grinder base and pedestal is1/8"
(base should be flush for MI-15450). Using second nut on each bolt, jam tighten against the first to
prevent loosening by vibration.
2. To mount grinder to wooden bench top, use 1/4 x 14" wood screws with flat washers beneath
heads. Tighten screws until space between grinder base and bench top is 1/8" (base should be
flush for MI-15450).
GROUNDING INSTRUCTIONS
WARNING
Improper connection of equipment grounding conductor can result in the risk
of electrical shock. Equipment should be grounded while in use to pro- tect operator from
electrical shock.
Check with a qualified electriclan if grounding instructions are not under- stood or if in doubt as to
whether the tool is properly grounded. This grinder is equipped with an approved 3-conductor cord
rated at 300V and a 3-prong, grounding type plug (See Figure 2) for your protection against shock
hazards. Grounding plug should be plugged directly into a properly installed and grounded 3-prong
grounding-type receptacle (See Figure 2).
Figure 2 - 3-Prong Receptacle
Do not remove or alter grounding prong in any manner. In the event of a malfunction or breakdown,
grounding provldes a path of least resistance for electrical shock.
WARNING
Do not permit fin-gers to touch the terminals of plug when installing or removing
from outlet.
Plug must be plugged into matching outlet that is properly installed and grounded In accordance with
all local codes and ordinances. Do not modify plug provided. If it will not fit in outlet, have proper outlet
installed by a qualified electrician. Inspect tool cords periodically, and, if damaged, have repaired by
an authorized service facility. Green (or green and yellow) conductor in cord Is the grounding wire.
If repair oracement of the electric cord or plug is necessary, do not connect the green (or green and
yellow) wire to a live termi- nal. Where a 2-prong wall receptacle is encountered, it must beaced with
a properly grounded 3-prong receptacle installed in accordance with National Electric Code and local
codes and ordinances.
WARNING
This work should be performed by a qualified electrician.
A temporary 3-prong to 2-prong grounding adapter (See Figure 3) is available for connecting plugs to
a two pole outlet if it is properly grounded.
Figure 3- 2-Prong Receptacle