Magnum Industrial MI-15300, Руководство по эксплуатации

Страница: 3 / 11

2. Do not use power tools in dangerous environments. Do not use power tools in damp or wet
locations. Do not expose power tools to rain.
3. Work area should be properly lighted.
4. Proper electrical plug should be plugged directly into properly grounded, three-prong receptacle.
5. Extension cords should have a grounding prong and the three wires of the extension cord should
be of the correct gauge.
6. Keep visitors at a safe distance from work area.
7. Keep children out of the workplace. Make workshop childproof. Use padlocks, master switches or
remove switch keys to prevent any uninten- tional use of power tools.
TOOL SHOULD BE MAINTAINED
1. Always unplug tool prior to inspection.
2. Consult manual for specific maintain- ing and adjusting procedures.
3. Keep tool clean for safest operation.
4. Remove adjusting tools. Form habit of checking to see that adjusting tools are removed before
turning machine on.
5. Keep all parts in working order. Check to determine that the guard or other parts will operate
properly and perform their intended function.
6. Check for damaged parts. Check for alignment of moving parts, binding of moving parts, breakage
of parts, mounting and any other condition that may affect a tool's operation.
7. A guard or other part that is damaged should be properly repaired oraced. Do not perform
makeshift repairs. (Use the parts list to order repair parts.)
General Safety Information (Continued)
KNOW HOW TO USE TOOL
1. Use right tool for job. Do not force tool or attachment to do a job for which it was not designed.
2. Disconnect tool from power when changing accessories such as grinding wheels, buffing wheeks
and the like.
3. Avoid accidental start-up. Make sure that the switch Is In the OFF position before plugging in.
4. Do not force tool. It will work most efficiently at the rate for which It was designed.
5. Keep hands away from moving parts and grinding surfaces.
6. Never leave a tool running unat- tended. Turn the power off and do not leave tool until it comes to
a complete stop.
7. Do not overreach. Keep proper footing and balance.
8. Never stand on tool. Serious injury could occur if tool is tipped over.
9. Know your tool. Learn the tool's operation, application and specific llmitations.
10. Use recommended accessorles. Understand and obey all safety Instructions supplied with
accessories. The use of improper accessories may cause risk of injury to persons.
11. Do not over tighten wheel nut.ace cracked wheel immediately. Use only flanges supplied with the
grinder.
12. Adjust distance between wheel and tool rest to maintain 1/16" or less "deb
13. Handle the workpiece correctly. Whenever possible, use tool rest to support workpiece during
grinding operation. Turn tool off if it jams.
14. Always use guards and eyeshields.
15. Clean grinding dust from beneath tool frequently.
Assembly
Parts to be fastened to the unit should be located and accounted for (See List and Figure 1).
IMPORTANT: Do not attempt assembly if parts are missing. Use this manual to order repair parts.