Magnum Industrial MI-15300, Руководство по эксплуатации, Страница: 2 / 11

Description
MAGNUM Bench Grinders are equipped with a totally enclosed ball bearing motor. Armature
assembly is dynamically balanced for smooth operation. Motor housing Is compact so long pieces of
work can ress against both wheels without touching the motor frame. Removable wheel guards allow
for easy changing of wheels. Tool rests are adjustable for wheel wear and angle grinding. Grinders
come complete with spark guards, safety eyeshields and dust collection hose.
Unpacking
Check for shipping damage. If damage has occurred, a claim must be filed with the carrier
immedlately. Check for com- pleteness. Immediately report missing parts to dealer.
Specifications
Model HP RPM AMPS Volts Hz
MI-15300 3/4 3600 6.5 115 / 230 60
MI-15350 3/4 3600 7.0/3.5 115 / 230 60
MI-15450 1 1725 10.0/5.0 115 / 230 60
ALUMINUM OXIDE VITRIFIED WHEELS
GRIT
1 ea. 36 Coarse and 1 ea. 60 Medium SIZES
MI-15300 : 8 Dla., 1 " Face, 5/8" Bore 8"
MI-15350 : 8 Dla., 1 " Face, 5/8" Bore 8"
MI-15450 : 10" Dia., 1 " Face, 1" Bore
General Safety Information
WARNING For your own safety, read operating instructions manual before operating tool.
WARNING Some dust created by power sanding, sawing, grinding, drilling and other con-
struction activities contains chemicals known to cause cancer, birth defects or other
reproductive harm.
Some examples of these chemicals are:
1. Lead from lead-based paints.
2. Crystalline sillca from bricks and cement and other masonry products.
3. Arsenic and chromlum from chemically-treated lumber.
Your risk from these exposures vary, depending on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well venti- lated area and work with approved safety
equipment. Always wear OSHA/NIOSH approved, properly fit- ting face mask or respirator when
using such tools.
BE PREPARED FOR JOB
1. Wear proper apparel. Do not wear loose clothing, gloves, neckties, rings, bracelets or other Jewelry
which may get caught in moving parts of machine.
2. Wear protective hair covering to contain long hair.
3. Wear safety shoes with non-slip soles.
4. Wear safety glasses complying with United States ANSI Z87.1. Everyday lasses have only impact
resistant lenses. They are NOT safety glasses.
5. Wear face mask or dust mask if operation is dusty.
6. Be alert and think dearly. Never operate power tools when tired, Intoxicated or when taking
medications that cause drowsiness.
PREPARE WORK AREA FOR JOB
1. Keep work area clean. Cluttered work areas and work benches invite accidents.