Magnum Energy ME Series Скачать руководство пользователя

Страница: 2 / 62

2010 Magnum Energy, Inc

Page i

Disclaimer of Liability

The use of this manual and the conditions or methods of installation, operation, use, and

maintenance of the ME Series Inverter/Charger is beyond the control of Magnum Energy Inc.

Therefore, this company assumes no responsibility and expressly disclaims any liability for loss,

damage, or expense whether direct, indirect, consequential, or incidental that may arise out of or

be in anyway connected with such installation, operation, use, or maintenance.
Due to continuous improvements and product updates, the images shown in this manual may not

exactly match the unit purchased.

Restrictions on Use

The ME Series Inverter/Charger may only be used in life-support devices or systems with the express

written approval of Magnum Energy. Failure of the ME Series Inverter/Charger can reasonably

be expected to cause the failure of that life-support device or system, or to affect the safety or

effectiveness of that device or system. If the ME Series Inverter/Charger fails, it is reasonable to

assume that the health of the user or other persons may be endangered.

Copyright Notice

distribute, and/or modify this document is prohibited without express written permission by Mag-

num Energy, Inc.

Contact Information

Magnum Energy, Inc.

2211 West Casino Rd.

Everett, WA 98204

Phone: 425-353-8833

Fax: 425-353-8390

Record the unit’s model and serial number in case you need to provide this

information in the future. It is much easier to record this information now,

instead of trying to gather it after the unit has been installed.

Model:

Serial Number:

ME2000 (-15B/-20B)

ME2012 (-15B/-20B)

ME2512

ME3112

Magnum Energy® is a registered trademark of Magnum Energy, Inc.

Содержание ME Series































































Результаты поиска

Содержание ME Series

Отзывы:

Похожие инструкции для ME Series

Бренды по названию

Популярные бренды

Magnum Energy ME Series, Руководство пользователя

Результаты поиска

Содержание ME Series

Отзывы:

Похожие инструкции для ME Series

Бренды по названию

Популярные бренды