Magnum Energy ME-RC Скачать руководство пользователя страница 47

Страница: 47 / 87

5.0 Operation

There are three operating modes of the inverter/charger:

• Inverter mode • Charger mode • Fault mode

• Inverting

– The inverter is providing AC voltage on its output by

inverting power from the batteries.

FAULT

PWR

CHG

INV

Status Message

Settings/Info...

FAULT LED on:

See Section 5.3.3

CHG LED on:

See Section 5.3.2

Only INV LED on:

See Section 5.3.1

See appropriate section

to determine meaning

of message. If message

scrolls with secondary

screen message, an

AGS fault is present.

Figure 5-2, System Status Screen (example)

5.3.1 Inverter Mode Status Messages

There are several Inverter mode messages. View the top line of the LCD

display and the corresponding message in this section to determine and

understand the particular Inverter mode.

FAULT

PWR

CHG

INV

Inverting

Settings/Info..

Inverting

appears on the LCD. The

PWR (green) and INV (green) LEDs

are on solid. The FAULT (red) and

CHG (green) LEDs are off.

Figure 5-4, Inverting Mode

FAULT

PWR

CHG

INV

Inverter Standby

Settings/Info..

Inverter Standby

appears on the

LCD. The PWR (green) and INV

(green) LEDs are on solid. The FAULT

(red) and CHG (green) LEDs are off.

Figure 5-3, Inverter Standby Mode

• Inverter Standby

– The inverter is part of a parallel stacked system

and is on, but not actively providing power. However, the inverter remains

active and available to start automatically if additional inverter power is

required.

5.3

System Status Messages

A status message may be an operational or fault message indicating the

inverter/charger’s current operating status. This section will cover the

inverter/charger’s operating and fault modes, and the available status

messages under each mode.
Use the displayed status message and the status LEDs on your ME-RC remote

(Figure 5-2) to determine the inverter/charger’s current operating status, and to

help troubleshoot the system if a fault occurs.

Содержание ME-RC
























































































Результаты поиска

Содержание ME-RC

Отзывы:

Magnum Energy ME-RC, Руководство пользователя, Страница: 47 / 87

Результаты поиска

Содержание ME-RC

Отзывы: