3
© 2010 Magnum Energy, Inc.
1.1.3 AGS Controller
The Controller provides adjustments and the generator’s wiring connections.
1
AGS Adjustments (x5) - The thumb wheel adjustments allow the
AGS to be confi gured to your specifi c system preferences.
RUN TIME HOURS - determines the length of time the generator
will run once the generator has automatically started.
START TEMP
°
F - allows you to enable and set a high temperature
value that will cause the generator to automatically start.
START VOLTS DC - allows you to enable and set a low battery
voltage value that will cause the generator to automatically start.
CLOCK AM/PM - determines the correct time which in turn allows
the Quiet Time feature to function correctly.
QUIET TIME PM/AM - used to prevent the generator from starting
during specifi c hours.
•
•
•
•
•
2
STATUS Indicator - this bi-color (green or red) LED indicator
illuminates to provide information on the AGS operation.
3
TEST Switch - a momentary pushbutton switch that allows the
AGS system to be tested for correct wiring and generator start/stop
operation.
4
Wiring Terminal Block - this 8-port friction-fi t connector powers the
AGS and connects the generator’s start/stop and run sense wires.
5
Mounting Flange - used to secure the inverter to a shelf or wall.
6
READY Indicator - this green LED indicator illuminates to indicate
that the AGS is powered and the remote switch is connected.
7
REMOTE Connection Port (purple label) - a RJ12 port which
provides the connection point for the remote switch.
6
7
5
1
2
3
4
Figure 1-3, ME-AGS-S Controller Features
1.0 Introduction
