background image

 9

Section 3: Safety & Service

Safety Information and Maintenance

1. ALWAYS put the Viewing Table in the LOCKED position (Brake Lever 
    to the far right) and use the hand holds in the base of the unit when 
    attempting to move the machine.  

2. Place unit on a sturdy table away from any heat source.  DO NOT 
place your unit on an unstable table, cart, or stand. Doing so may allow 
the unit to fall causing serious damage to the unit or bodily injury. 

3. Use of a surge protected power strip is recommended to protect 
your unit from power outages, etc.

4. Avoid putting your hands and fingers into any opening (touching the 
camera lens or mirror in the camera housing could reduce image 
quality).

5. Dust the screen as needed with a soft, dry cloth.

6. Making sure that the unit is powered OFF, use a slightly damp cloth 
to clean the unit’s surfaces.  Do NOT spray chemicals or cleaning 
liquids directly on the unit.

Service Information

Your Unit CONTAINS NO USER SERVICEABLE PARTS.  ALL SERVICE 
MUST BE DONE BY THE FACTORY OR AN AUTHORIZED SERVICE 
CENTER (where available).

In the event of malfunctions or questions, please contact us:

 

 

 

 

 

 

 

 

 

MagniSight, Inc.

Call  (800) 753-4767, or (719)578-8893

Содержание Explorer MSE-L22-HD












Отзывы: