magnetic
...einfach besser
9
Troubleshooting
Fault
Solution
No display or battery
symbols appears
Low battery power alert
The “battery” symbol on the display will blink when the batteries are drained.
The last measured and displayed value and the settings will be stored and
recovered when the battery replacement is completed.
Inserting/replacing the batteries
Remove the four front screws of the housing (see illustration below) and insert
three batteries (AAA alkaline) into the battery holder. The front part of
the housing can be turned by 90° or 180° if desired before fastening with the
screws.
Video
The resin is exhausted
quicker than calculated
Loss of capacity
There is probably no fault. It could be that the untreated water contains not
only limescale (calcium carbonate) but also other dissolved substances (sulphates,
nitrates, chlorides) which are removed and thus reduce the capacity.