Magnetic MPB-311 Скачать руководство пользователя страница 100

Страница: 100 / 116

100

MPB-311

Cleaning and maintenance

13.2.2

Cleaning the support beam from the inside

NOTICE

Improper cleaning!

Cleaning with a vapour or pressure-jet cleaner will damage or destroy

electrical components and cables.

›

Never clean the support beam with vapour or pressure-jet cleaners.

1. Disconnect the pedestrian gate from the power supply. Ensure absence of

voltage. Secure against reactivation.

DANGER

Danger to life, electrical voltage!

2. Open cover.

Page 88, chapter 9.3.1.

3. Use a vacuum cleaner to clean dust from the inside of the support beam.
4. Close cover.

13.3

Maintenance schedule

The maintenance plan lists all work required to ensure safe, optimum and trouble-

free operation of the pedestrian gate.
The components do not have to be replaced by default.
The work listed in the maintenance plan are visual inspections and functional checks

that we either recommend for safe, optimum and trouble-free operation of the

pedestrian gate or that are prescribed by official regulations, ordinances, rules,

guidelines and/or standards.

Содержание MPB-311





















































































































Результаты поиска

Содержание MPB-311

Отзывы:

Бренды по названию

Популярные бренды

Magnetic MPB-311, Руководство по эксплуатации

Результаты поиска

Содержание MPB-311

Отзывы:

Бренды по названию

Популярные бренды