RIPPLE DETECTED
××.××V NORMAL
NO RIPPLE DETECT
7.
Following
the
charging
system at idle, press «ENTER»
for the charging system with
accessory loads. Turn on the heater blower to high,
high beam headlights, and rear defogger (If
equipped). Do not use cyclical loads such as air
conditioning or windshield wipers.
8.
When testing older model
diesel engines, the user need
to run up the engine to 2500
rpm for 15 seconds. You will
see the run engine up instruction screen.
9.
Press «ENTER» to look for the amount of ripple
from the charging system to the battery. One of
two testing results will be displayed along with the
actual testing measured.
Diodes function well in the
alternator / stator.
OR
TURN ON LOADS
AND PRESS ENTER
RUN ENGINE UP TO
2500 RPM 15 SEC.
RIPPLE DETECTED NORMAL
EXCESS RIPPLE
DETECTED