Magnetek Impulse-t 2006-T, Инструкция по эксплуатации

Страница: 30 / 82

IMPULSE•T Instruction Manual - October 2015
3-10
Wiring the Control Circuit
Control Circuit Terminals
The IMPULSE•T is shipped standard with a 120 VAC interface card, allowing direct connection of
120 VAC user input devices. The interface card connects to drive terminals S1–S5 and SC. The
user input device then connects to terminals S1–S5 and X2 on the interface card. Terminals S1
and S2 are factory programmed for the forward and reverse run commands; however, they can be
programmed for speed control and other functions like the remaining terminals. The figure below
shows the control terminal arrangement for the IMPULSE•T along with the 120 VAC interface card.
Figure 3-4: IMPULSE•T 120 VAC Interface Card