Magnetek FLEX EX2, Инструкция по эксплуатации

Страница: 24 / 39

Flex EX2 Receiver Select Instruction Manual
August 2018
Page 24 of 39
4.1.6 Transmitter Inactivity Timer Settings
After 5 minutes (default) of the transmitter pushbuttons not being pressed, the system
will go into Sleep mode and the receiver MAIN relays will be deactivated.
4.1.7 Zero-G Sensor Settings
The transmitter is embedded with a Zero-G sensor to guard against any unintended
control of the crane or equipment when the transmitter is dropped. By default, the
sensor is disabled. When the sensor is enabled and a drop is detected, the receiver
MAIN relays are deactivated. Please contact Magnetek field service for more details.
4.1.8 Transmitter Start Function Settings
When the transmitter goes into Sleep mode and the receiver MAIN relays are
deactivated, execute the START command (default) or press any pushbutton to
reactivate the MAIN relays.
Dipswitch
Settings
Time
Dipswitch
Settings
Time
1 xxx 000 xxxx 1 minute 5 xxx 100 xxxx 10 minutes
2 xxx 001 xxxx 20 seconds 6 xxx 101 xxxx 30 minutes
3 xxx 010 xxxx 3 minutes 7 xxx 110 xxxx 60 minutes
4 xxx 011 xxxx 5 minutes 8 xxx 111 xxxx
Constant On (Sleep
mode disabled)
Dipswitch
Settings
Function
1 xxxxxxxx 0 x Sensor Disabled
2 xxxxxxxx 1 x Sensor Enabled
Dipswitch
Settings
Output Power
1 xxxxxxxxx 0
START
Reactivation
2 xxxxxxxxx 1
Any Button
Reactivation