IMPULSE®•G+/VG+ Series 4 Analog Input Installation Manual - August 2011
1-16
7.
Route the option wiring.
Depending on the drive model, some drives may require routing the wiring through the side of the
front cover to the outside. In these cases, cut out the perforated openings on the left side of the drive
front cover as shown in Figure 11-A and leave no sharp edges to damage wiring.
Route the wiring inside the enclosure as shown in Figure 11-B for drives that do not require routing
through the front cover.
Refer to the IMPULSE
®
•G+/VG+ Series 4 Instruction Manual for more information.
<1> The drive will not meet NEMA Type 1 requirements if wiring is exposed outside the enclosure.
Figure 11: Wire Routing Examples
