4/12
LG20 initial Setup Manual
LG20-1/2/3)
After about 2 seconds
How to set up Basic Settings (1/3)
When the power is turned on for the first
time after shipment from the factory
Connect the AC adapter and turn the primary power "on".
Step 1
When you want to change the basic
settings
The following display appears
NOTE:
If you change the basic settings,
Detailed Settings will be reset to the factory defaults.
Configure the basic settings.
Choose one of the following methods of operation.
AC adapter is energized.
Turn on
key, the LED light changes from
“blinking” to “off” and then press
and hold
key for 3 seconds.
Standby key light
Item feed Key
SET-UP key
Enter key
Axis selection Key
Continued on next page
Pressing
key changes the basic settings mode in the order in which it is set.
COUNTRY (destination country):
Please select your region
Signal resolution (measuring unit resolution):
Sets the output resolution of the scale to be
connected. Supports the input of length and angle
display units.
Symbol
Destination
Unit
STD
General area
US
U.S.A.
JPN
Japan
COUNTRY (Destination)
COUNTRY
Destination
SIG RES
M
easuring unit resolution
DC input
Connecting the AC Adapter
AC primary power source
