Introduction
Congratulations on your purchase. The Magneplanar 3.7i loudspeaker was
conceived and designed by perfectionists, for perfectionists. Due to the elegant
simplicity and ruggedness of the design, the Magneplanar 3.7i loudspeaker will
give many years of trouble-free service.
General Description
The 3.7i is a 3-way, full-range ribbon design with a quasi-ribbon bass and
midrange, and true-ribbon tweeter.
Carton Contents
•
1 pair 3.7i loudspeakers
•
2 each oval base
•
8 each screws (6- 1 1/4 inch screws, 2 3/4 inch screws)
•
4 each 1 ohm resistors
•
2 each jumpers
•
2 each Magneplanar logos
•
1 each Allen wrench
Packaging
Save all packaging. If you need to transport the speakers, they can be shipped
safely only in the original packaging. You may never have to return your
loudspeakers, but should the occasion arise, they should not be shipped in any
packaging but the original. Should you discard it, packaging is available.
Assembly
This will require the help of an assistant. Lay the speaker face down on a fabric-
covered table, or as an alternative, carefully lay the speaker on its side. Attach the
L-shaped brackets to the oval base and to the speaker panel using only the
shorter length screws as shown in the diagram. Next, install the supporting braces
with the longer length screws for each bracket. To prevent cross-threading the
bolts, install by hand before using a screw-driver. Do not use power tools.
Revised 2-10-19
Page of
3
8
