background image

Be sure the power requirement is adequate for the model you have chosen. This information can be found

 

on the serial plate, which is  located on the side of the cabinet and behind the grille.
Be sure the air conditioner is properly grounded. To minimize shock and fire hazards, proper grounding is 
important. The power cord is equipped with a three-prong grounding plug for protection against shock 
hazards.
Your air conditioner must be used in a properly grounded wall receptacle. If the wall receptacle you intend
to use is not adequately grounded or protected by a time delay fuse or circuit breaker, have a qualified 
electrician install the proper receptacle. 
Ensure the receptacle is accessible after the unit installation.

WARNING

For your safety

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or 

any other appliance.

Avoid fire hazard or electric shock. Do not use an  extension cord or an adaptor plug. 

Do not remove any prong from the power cord.

WARNING

Electrical Information

PARTS IDENTIFICATION

Check all the accessories are included in the package and please refer to the installation instructions for 

their usage.

NOTE: Optional parts(     ),  for some models only.

All the illustrations in this manual are for explanation  purpose only. Your air conditioner 

may be slightly different.

NOTE:

INCLUDED ACCESSORIES

PARTS

PARTS NAME

QUANTITY

1 set

 Foam seal

3 pcs

ET

P

M

UA

OT 

OC

LO

RDY

EH

TA

AFN

GI

H
H

E

M

D

OLW

O

M
ED

AF

N
EP

DE

WS
GN

I

MI

T
RE

O N

CE

NO

MO

Y

NO

O/

FF

MI

T
RE

FF

ER

ES

T
COK

ES

T
ME

EP

AR

UT

ER

   

(
)C

   

  
F  

 
LO

OLW

   

  
   

  
M  

 
E

   

  
L  

 
DE

D  

  

PS

I
ALY

OIN

UT

BRO

 Remote Controller and Battery

(For remote control models only)

1 set

 Drain hose 

1 pc

(  )

Exhaust hose(supplied),adapter B

and Window Slider Kit and bolt (  )

3

Содержание P-14PE



















Отзывы: