Magnavox MRV640, Руководство пользователя

Страница: 81 / 187

69
Sound
Digital output All
Analog output Stereo
Night mode Off
Sound settings
Depending on the audio outputs being used, this menu provides you with a selection of settings.
If you are only using the analog audio outputs (red and white
L AUDIO R OUT , AUDIO
OUT
jacks), select '
Off
' in the '
Digital output
' menu.
' Digital output '
You can select one of the following settings for devices that are connected to the DIGITAL
AUDIO COAX OUT
jack:
'
All
' : Dolby Digital and DTS signals are going out unchanged through the digital output. MPEG-2
multi-channel signals are converted to PCM (Pulse Code Modulation).
Use receivers/amplifiers
with a digital multi@channel sound decoder .
' PCM only ' : Dolby Digital and MPEG-2 multi-channel signals are converted to PCM (Pulse Code
Modulation).
Use this with receivers/amplifiers
without a digital multi@channel sound
decoder .
' Off ' : digital output is off.
Use this if the Recorder is connected only to devices with an analog audio input .
'
Analog output
'
You can select from the following settings for devices connected to the analog outputs (
L
AUDIO R OUT , AUDIO OUT ).
' Stereo ' : For devices that use neither DolbySurround nor TruSurround. Only use this setting
when the DVD Recorder is connected to a stereo TV.
' Surround ' : Dolby Digital and MPEG-2 multi-channel are mixed to a Dolby Surround-compatible
two-channel output signal.
For devices
with a Dolby Surround / Pro Logic decoder .
' Night mode '
Night mode optimizes the sound dynamics at low volume. This causes less disturbance in quiet
environments. This setting only functions with Dolby Digital Audio on DVDs.
ENGLISH
User preferences