15
14
Troubleshooting
Remote does not operate your product.
•
Press the mode button of the product you want to
control.
•
Program the remote with a new code.
•
Install new batteries. (You might have to reprogram
your remote after installing new batteries.)
•
Remote may not be compatible with your product.
Remote does not operate some features of your product.
•
Program remote with a new code.
•
Remote may not be able to operate all features of
your product or button names might be different
than your product.
Red Indicator blinks after you program a product code.
•
Remote did not accept the code.
•
Try to program the code again or try a different
code.
For help with setup, please call: 919-573-7854.
The manufacturer warrants that this product shall be free
from defects in material, workmanship and assembly,
under normal use, in accordance with the specifications
and warnings, for as long as you own this product. This
warranty extends only to the original purchaser of the
product, and is nontransferable. Defective products,
together with the dated proof of purchase, must be
returned to the place of purchase for repair or
replacement. THERE ARE NO OTHER EXPRESS
WARRANTIES. Incidental and consequential damages
are disclaimed where permitted by law. This warranty
gives you specific legal rights, and you may also have
other rights which vary from state to state.
Made in China. Quality Assured in USA.
Ledgewood, NJ 07852
Limited Lifetime Warranty
TV/VCR/INPUT
When in TV mode the
TV/VCR/INPUT
button performs
the INPUT source switch function.
When in a mode that has been programmed for VCR the
TV/VCR/INPUT
button performs the TV/VCR antenna
switch function.
When in a mode that has been programmed for Cable the
TV/VCR/INPUT
button performs the A.B switch
function.
When in a mode that has been programmed for SAT the
TV/VCR/INPUT
button performs the TV/SAT switch
function.
When in a mode that has been programmed for DVD the
TV/VCR/INPUT
button performs the DVD Setup
function.
OK
means same as SELECT - some manufacturers use
OK label and others use SELECT label on their remotes.
CC
will activate the Closed Caption feature if your
device has that feature.
Setup, cont.
MRU1301-OM_H14104.pmd
9/6/2006, 3:56 PM
14-15
