General Operation:
OPERATIONS:
7
1. Recharged the built in battery as previously instructed.
2. Press the Power ON/OFF Switch to ON position on the right of unit to turn the unit to standby mode.
The POWER Indicator on the top of unit will illuminate.
3. Press and hold the /MODE Button on the top of unit approximated 1 second until “ON” appear on the LED
Display to turn on the unit from standby mode. The LED Display will illuminate.
4. Press the /MODE Button repeatedly to switch to desired playback mode. The correspondent indicator will
appear on the display with your selection (see list below):
Playback Mode:
Indicators:
BT (Bluetooth)
“bt” will appear on the display
USB (If USB Device inserted)
“USb” will appear on display
Radio FM Band
Radio frequency “XX.X” or “XXX.X”
will appear on the display
AUX IN
“AUX” will appear on the display
5. During playback,
A. Turn the Volume Control Knob on the top of unit to adjust volume level as desired.
B.
Press the
LIGHT Button repeatedly to
change the blinking mode of the Decorative
LED Lights
C.
Press the BATTERY METER
to read the power of the built-in battery.
6. When finished listening, press the /MODE Button to turn the unit to Standby Mode.
7. If you will not use the unit for an extended period of time, power off the unit by press the Power ON/OFF
Switch to OFF position. The POWER Indicator will not light.
IMPORTANT:
The unit is for Water and Dusts Ingress Protective; always make sure all the covers were completely
closed tightly and firmly.
ON/OFF
turn
or
.
Button
