USB:
2. Power on the unit and play the music as usual.
USB Device NOT Included
MIC
GT
USB
POWER
ON
OFF
1. Insert the USB Device into the USB port as the figure below:
USB
3. Press the MODE/ Button on top of the unit repeatedly until the USb appears on display.
" "
4. The unit will play the music in the connected USB device automatically. (Make sure the volume level of
the external device in high level. Otherwise, sound from this unit is weak).
5. During playback:
●
Press the Button to pause; press and release again to resume normal playback.
●
Press the or Button to skip tracks.
●
Press and hold the or Button to fast backward or fast forward.
6. When finished, unplug the USB device.
NOTE: When the USB device inserted, USB mode will be selected automatically.
SIDE PANEL
USB CHARGING:
11
To charging the external USD Device:
1. Make sure the unit is in power on or standby mode.
2. Connect the full size USB Plug from the external USB Device to the 1A USB Port on the right on unit.
3. The charging will auto start.
4. When finished charge, disconnect the external USB Device from the 1A USB Port.
Notes:
A. Before charge the external USB Device, check the power of the built-in battery. If the power of the battery
is too low, it cannot be charge the External USB Device.
B. The unit has a built-in overload/overheats protector. If the output of the unit is overload (or short circuit).
The charger will auto shut off. Unplug the external USB Device from the 1A USB Port.
The charge will auto reset.
1A OUT
DC IN
