TO DC IN JACK
To Wall Outlet
Notes:
POWER SOURCE
SIDE PANEL
MIC
GT
USB
POWER
ON
OFF
5
The unit has a built in Sealed Lead Acid rechargeable battery, recharge it before use or when it is drained as follows:
1A OUT
DC IN
2.Connect the small plug from the supplied AC/DC Adaptor to the DC IN Jack on the right of unit as the illustrated below.
3.Plug the AC/DC Adaptor to the AC wall outlet having AC 100-240V~, 50/60Hz as illustrated below.
5.During charging, you can also play and listening music at the same time.
1.Make sure the unit is in Standby or Power on mode. Otherwise, press the POWER ON-OFF Switch to ON position to
power on the unit to standby mode.
4.During charging, the Indicators on the Battery Meter will illuminate and blink to show the charging status. When finished
charging, all indicators on it will illuminate and stop blinking.
Your battery will last longer if you're following these simple guidelines for charging and storing.
A. Before first time use, charge it approximately 10 hours until the unit is fully charged.
B. Recharge and store the unit within the temperature range of 5°C~35°C (40°F~95°F).
D. Battery life naturally shortens slowly over time.
E. The rechargeable battery incorporated in this product is not user replaceable.
F. If long period of time will not use, unplug the Adapter from wall outlet.
C. Do not charge longer than 24 hours. Excessive charging or running the unit until the battery fully drains will
damage battery. Battery life will be extended if you keep the battery fully charged.
