4. Ensure that both the intake and the exhaust vents are clear of obstructions.
5. Connect the power cord to the electrical outlet.
6. Turn the Power Control Switch to the ‘HIGH’ position, and turn the
Temperature Control Switch to the highest setting.
7. If your heater does not operate normally, turn the Power Control Switch to
the
‘OFF’ position, disconnect the power cord from the electrical outlet, and
consult
an authorized repair technician.
Troubleshooting
If your heater fails to operate, perform the following:
1. Review this manual to ensure that you understand the basic operations
and features of your heater.
2. Check your household circuit breaker or fuse.
3. Check for obstructions at the intake and exhaust vents.
•
If obstructions are present, refer to the instructions for resetting your
heater when the Overheat Protection System has been activated.
•
If no obstructions are present, and your heater still does not operate
normally,
switch off the heater, disconnect the power cord from the
electrical outlet, and
consult an authorized repair technician.
CUSTOMER ASSISTANCE
FOR IMMEDIATE CUSTOMER SERVICE, CALL: 1-855-463-3518
A CUSTOMER SERVICE REPRESENTATIVE WILL ASSIST YOU
WITH ANY
QUESTIONS REGARDING YOUR HEATER
.
www.magnavox.com
MAGNAVOX and SMART. VERY SMART are registered
trademarks of Koninklijke Philips N.V. and are used under
license from Koninklijke Philips N.V.
Made in China
Distributed by:
OBO, Baltimore, MD