PARTS OF THE HEATER
PARTS OF THE HEATER
1. Oil fins (x7)
2. Carry handle
3. Display
4. control panel
5. Power cord housing
6. Rolling casters
DO NOT OPEN OR REFILL/CHANGE
OIL FINS
OIL FINS ARE PERMANTLY
SEALED AND DO NOT REQUIRE
REFILLING OR OIL CHANGING.
ATTEMPTING TO OPEN FINS WILL
DAMAGE THE UNIT. THIS UNIT IS FILLED
WITH A NON TOXIC MINERAL OIL.
1
2
3
5
6
DESCRIPTION
PART
QUANTITY
CAUTION:
DO NOT OPERATE THIS HEATER WITHOUT CASTERS ATTACHED
Assembly Instructions:
• Unpack the heater and remove all parts from the packaging.
1.For ease of assembly, place the heater upside down or on its side on
a soft surface which will not scratch the unit. Use one hand to hold it
in place. (1)
2.Unscrew nut and put U-shape bolt in one hole of bracket. (2)
3.Attach the bracket onto the heater with the U bolts and wiring
nuts supplied as shown in 3, 4, 5.
4.Assemble another castor with bracket same with 2, 3, 4, 5.
U-Shape
Bolt & Wing Nut
2
U-Shape
2
Bracket with
Castor
4