setting the timer.
Controls on remote control
•
: press this button after plug in to power on the heater
and start operation,
or press it repeatedly to stop operation
and set the heater into standby mode.
• Power
: use this button to set the power level.
• Timer
: use this button to set the timer.
•
[
+
] and [
-
]: use these buttons when setting the desired
temperature, or for setting the timer.
Setting the temperature
The heater has a thermostat which enables you to set the temperature from 56°F to
86°F. Once a temperature has been set, the heater will remain on until the room
temperature has reached the temperature on the digital display. The thermostat will
then cycle on and off to maintain the set room temperature.
• Power on the heater, the display will show 88 and keep flashing. Press Power
button to set the desired power level. The desired temperature 75°F and power
level will be shown and flash on the screen.
• Use the [
+
] and [
-
] buttons to set the desired temperature, from 56°F to 86°F.
• While the heater is warming up the room, the heat level symbol will keep
flashing on the display until the set temperature has been reached. The symbol
will stop flashing then. The heater comes on again when the room temperature
drops below the desired temperature.
• Use the [
+
] and [
-
] buttons to change the desired room temperature at any
time.
Setting the timer
When the heater is powered on. You can set the timer to switch off the appliance
automatically after a certain period of time (1 to 24 hours from the time the
function is set).
Power on the heater, the display will show 88 and keep flashing. Press
Timer button to set the desired power off time. The display will show 00 and
start flashing on the screen.
Use the [ + ] and [ - ] buttons to set the heater operation time (between 1
and 24 hours). The function will activate once the timer icon stops flashing.
The heater will cycle on and off as per the set temperature setting and
discontinue operation when the set time has run out.
1.
2.
3.